How to apply your glass safety decals

The easiest way to apply your 'Glass Safety Decals' is by using our 'Wet Application Method'. The reason we suggest this way is so you have plenty of time to position the decal correctly.

Tools required: Spray bottle, mild dish detergent or baby shampoo, water, applicator card (provided) or squeegee, spirit or laser level, measuring tape.

1) When your glass safety decal arrives begin by cleaning the glass to which your decal is to be applied thoroughly. Then prepare your wetting solution which is a few drops of mild dish detergent or baby shampoo mixed with water in a spray bottle.

2) Begin by gently removing the backing sheet from your decal as shown making sure the vinyl has transferred on to the transfer tape. Spray the now exposed adhesive with the wetting solution you have prepared and apply to the glass panel. Be sure to also spray the glass with wetting solution prior to applying the decal.

3) Position the decal - Measure between 900-1000mm above the floor level for commercial compliance and 700-1200mm for residential compliance. (Tip: A laser level or spirit level can assist you with helping to keep the decal straight.)

4) Using the supplied applicator card or a window squeegee begin pressing out the wetting solution and any air bubbles.

5) Let the decal fully dry and then gently remove the transfer tape. (It can a few hours for the decal to fully dry before removing the application tape)